886-4-24919588
886-4-24915275
No. 225, Jen Hwa Rd., Ta-Li Dist., Taichung City, Taiwan
http://www.aristech.com.twProducts
FEATURE:
MULTI FUNCTIONS:
1.By inputting the wire diameter , workpiece material & thickness , and desired surface finish , optimum
cutting conditions are automatically generated from memory.
2.It is possible to carryout the machining conditions of second, third, fourth cutting; the second cutting easily obtained by using the retrace function.WIRE BREAKAGE RECOVERY:
1.In case of wire breakage during machining, just press
button and wire returns to start point.By ressing 
button , wire will move rapidly retracing machining path back to that point. WATER COOLING CONTROL:
1.The inverter control for pump and water coolant unit keep the thermal balance on every part of the machine and lowexpansion of material in submerged machining.WIRE FEEDING:
1.Operator has only to pass wire through lower nozzle guide and wire will be taken by the water-jet wire-collecting device to the collector.
2. Equipped power mos-transistor circuit system. max. out-put current 25 ampere .REMOTE CONTROL BOX:
1.For the convenience of operator , the remote control box contains many of the functions required for set-up.
2.PC-base designed, CNC Controller with IPC, used G.M. NC-code edit. standard with CF CARD and RS-232c interface.
| ITEM | CW-10 | CW-30 | CW-40 | CW-50 | CW-70 |
|
Machining method |
Submerged or Flushing |
||||
|
Max.workpiece size |
680x420x150 |
780x500x250 |
880x500x250 |
1,000x690x300 |
1,200x790x300 |
|
Max. workpiece |
250kg |
500kg |
550kg |
800kg |
1,000kg |
|
X,Y axes travel |
300x200(mm) |
400x300(mm) |
500x300(mm) |
600x400(mm) |
800x500(mm) |
|
Z axis travel |
150(mm) |
250(mm) |
250(mm) |
300(mm) |
300(mm) |
|
U,V axes travel |
|
|
 50x50(mm) |
|
60x60(mm) |
|
X-Y axis feed rate |
Max. 900mm/min |
||||
|
Drive motor |
AC Servo Motor |
||||
|
Wire diameter |
ø0.25mm(ø0.15 - 0.3) |
||||
|
Wire tension |
200-2500gf |
||||
|
Wire feeding speed |
0-15m/min |
||||
|
Best surface |
Ra0.65 |
||||
|
Max. taper angle |
|
||||
|
Max.wire |
6kg |
6kg | 6kg | 10kg | 10kg |
|
Work tank |
(S)850x573x375 |
(S)970x719x510 |
(S)1070x719x480 |
(S)1136x900x530 |
1492x972x480 |
|
Machine weight |
1500kg |
2200kg |
2400kg |
2800kg |
4100kg |
30(mm)
DIELECTRIC FLUID SUPPLY UNIT (FILTERING UNIT)：
| ITEM | CW-10 | CW-30 | CW-40 | CW-50 | CW-70 |
|
Filter tank capacity(liter) |
480/420 |
690/420 |
830/420 |
1215/420 |
420 |
|
Filter element |
Paper filters |
||||
|
lon exchange resin |
15 |
||||
|
Conductivity control |
Standard |
||||
|
Fluid temperature control |
Auto |
||||
|
Outside dimension (WxHxD)(mm) |
(S)1100x1400x1290 |
(S)1100x1570x1290 |
(S)1150x1820x1360 |
(S)1200x1800x1470 |
950x1400x1290 |
|
Net weight |
200kg |
250kg |
260kg |
280kg |
280kg |
| POWER SUPPLY UNIT | |
|
Circuit system |
Power MOS transistor |
|
Max. output current |
25A |
|
Voltage select |
145Volt. |
|
IP select |
10 steps |
|
Off time select |
50 steps |
| CNC CONTROL UNIT | |
|
I/O device |
Keyboard, RS-232C, CF CARD |
|
Display type |
15" LCD-TFT |
|
Control system |
IPC, close loop software servo system |
|
Control axis |
X, Y, Z, U, V, (5 axes) |
|
Setting unit |
0.001mm |
|
Max. command value |
|
|
Interpolation |
Linear/Circular |
|
Command system |
Abs./lnc. |
|
Machining feed control |
Servo/Const. Feed |
|
scaling |
0.001-999.999 |
|
Auto 2nd cut system |
Re-trace and auto changed machining data |
|
Machining condition memory |
0-255 |
|
Outside dimensions(WxDxH) |
600x870x1850mm |
|
Total AC power input |
3ø220V |
