886-2-85112370
886-2-85110517
No. 46, Lane 88, Sec. 2, Kwang Fu Rd., San Chung City, Taipei Hsien, Taiwan
www.edm-skm.com.twProducts
Mechanical features of this series:
Machine head servo utilizes a special bearing design for stability, zero interval and load rate twice as high as conventional units.
Dielectric fluid nozzles built in machine head that efficiently removes debris, saves time and is convenient.
Friction-resistant PC thin-layer contact-sensitive board for attractive appearance, dust-resistance and longer service life.
Precision interior servo housing design, using PCB design for extended service life, safe operation and easy maintenance.
| Basic Functions: | |||
|
Innovatively equipped with three types of safety devices, has an infrared fire monitor, oil temperature monitor, automatic fire extinguisher and many other safety design features to provide absolute distancing from flames. Has special capabilities for hole depth, blind hole, lateral Surface and large area electrode finishing. Has an automatic sparking off time adjustment to prevent carbon accumulation and electrode wear. High sensitivity PWM servo drive and sparking gap control to obtain smooth and fine surface finish. Utilizes a special MOSFET electrical discharge circuit design for rapid speed finishing and reduced electrode wear to enable mold surface polishing and prevent surface hardening. |
|||
| Special T50 / T60 Servo Functions: | |||
|
Three-axis locations utilizes optical measurement feedback for high precision positioning. The optical measurement resolution can be adjusted in gradations of 1µm or 5µm. Has unlimited sparking conditions and processing settings. Has a sparking period servo that supports the active utilization of finishing depth. Utilizes the most advanced 32-bit industrial-use high speed computer control offering powerful functions and easy operation. Has metric and inch measurement unit as well as Chinese and English language switching functions. Optical measurement direction can be set or modified by internal code. Supports single-hole and multi-hole single-depth or multi-depth automatic fine finishing without requiring program re-write or utilizing programmable multiple depth auto fine finishing. Optional mirror surface finishing system can be installed to achieve ultra-fine surface finishing of more than Ra0.2µm. |
|||
| Standard Accessories: | Additional Equipment: | ||
|
Precision Electrode Clamps. Piezoelectric Light. Work Fastening Tool Kit. Magnetic Induction Oil Nozzle Base. Operations Manual. |
Erowa" Chuck--Swiss 3R System Chuck--Swedish Di-Electric Cooler Electric Oil Permanent Magnetic Chuck M.F.D(Fine Mirror Finish) |
||
|
Specification
|
T50
|
T60
|
|
X-Travel and Setting Accuracy
|
300 mm x 0.01 mm
|
400 mm x 0.01 mm
|
|
Y-Travel and Setting Accuracy
|
200 mm x 0.01 mm
|
300 mm x 0.01 mm
|
|
Z-Travel and Setting Accuracy
|
200 mm x ±0.004 mm
|
200 mm x ±0.004 mm
|
|
Backslide Travel and Setting Accuracy
|
190 mm x 0.01 mm
|
190 mm x 0.01 mm
|
|
Work Tank Dimension
|
870 x 510 x 320 mm
|
1090 x 580 x 360 mm
|
|
Table Dimension
|
600 x 360 mm
|
660 x 380 mm
|
|
Maximum Table-Quill Distance
|
600 mm
|
600 mm
|
|
Maximum Electrode Weight
|
90 kgs
|
120 kgs
|
|
Maximum Table Loading
|
800 kgs
|
1000 kgs
|
|
Nominal Current
|
30A / 5A、45A / 5A 、
60A / 5A |
30A / 5A、45A / 5A 、
60A / 5A |
|
Input Voltage
|
220 / 380 / 415 / 440 V
|
220 / 380 / 415 / 440 V
|
|
Connected Rating
|
4 KVA / 5.5 KVA / 7 KVA
|
4 KVA / 5.5 KVA / 7 KVA
|
|
Maximum Stock Removal Rate
|
200 / 300 / 400 mm3 / min
|
200 / 300 / 400 mm3 / min
|
|
Best Surface Roughness
|
Ra 0.2 µm
|
Ra 0.2 µm
|
|
Best Electrode Wearing Rate
|
<0.2 %
|
<0.2 %
|
|
Dielectric Tank Capacity
|
200 liter
|
400 liter
|
|
Filters
|
2 pcs
|
3 pcs
|
|
Machine Weight
|
1400 kgs
|
1650 kgs
|
