EASTAR MACHINE TOOLS CORP.
886-4-25224667
886-4-25205010
No.202, Ln. 519, Sec. 2, Guofeng Rd., Fengyuan Dist., Taichung City 420, Taiwan
www.eastar.com.tw

Products

Grinding Machines
Universal Cutter Grinder
M-40

Specification

Capacity : Inch Metric

Swing over table : 10" 250mm

Distance between center : 27 1/2" 700mm

Distance between tailstock & workhead : 22 3/4" 580mm

Taper hole in workhead spindle : one end ASA No. 50

Other end M.T.No. 5 or B & S No. 12 (Specify by order)

Table

T-Slot (number & size) : one 0.565"               +0.05mm

                                                  15,00mm

                          0.563"                   -0.00mm

Working surface :    5 5/16"x37" 135x940mm

Grinding wheel spindle rpm : 2600,3700,6200

Range of movement : Inch Metric

Longitudinal movement of table : 16" 400mm

Cross movement of saddle : 10" 250mm

Graduation for table swivel movement : ±60°

Table graduation on end, for taper of : ±10°

Vertical movement of wheel head : 10" 250mm

Wheel head tilts : ±15°

Wheel head swivels : 360°

From wheel spindle center: max. 12" 300mm

to top of table : Min. 2"  50mm

From wheel spindle center : max.16 1/2"  415mm

to T-slot center : Min 6 1/2" 165mm

Required floor space : 61"x68 1/2" 1550x1735mm

Net weight of machine : 2560Ibs.  1160kgs

Dimension of Packing case : 1460x1460x1510mm

 

 

Standard Equipment

1. Workhead

2. Left-hand tailstock

3. Right-hand tailstock

4. Diamond dresser holder

5. Wheel guard

6. Wheel guard

7. Wheel guard

8. Wheel guard

9. Wheel guard holder (long)

10. Wheel guard holder(stock)

11. Universal tooth rest plate and blade holder extension

12. Center gauge

13. Collet wrench

14. Plain tooth rest holder (with offset blade)

15. Ejector rod

16. T-wrench for grinding wheel sleeve

17. Sleeve extracting bar

18. Pin wrench

19. Micrometer adjustable toothrest(With round top blade)

20. Levelling pads (3 pcs)

21. Touch-up paint

22. Plain tooth rest holder (with offset blade)

23. Reducing collet B & No. 12xNo. 10(or MT No. 5xNo. 4)

24. Reducing collet B & S No. 12xNo. 9(or MT No. 5xNo. 3

25. Reducing collet B & S No. 12xNo. 7(or MT No. 5xNo. 2)

26. Grinding wheel sleeves (5 sets)

27. Grinding wheel (6" x3/4"x1 1/4")

28. Grinding wheel (6"x1/2"x1 1/4")

29. Grinding wheel (6"x1/2"x1 1/4")

30. Grinding wheel (3"1/2"x1 1/2"x1 1/4")

31. Grinding wheel (4"x1/16"x1/2")

23. Grinding wheel (5"x1 1/2"x1 1/4")

33. Grinding wheel (3"x1/2"x1/2")

34. Double end wrench

35. Nut wrench

36. Driver

37. Nut wrench

38. Allen type wrench

39. Washer for 1/8" dia. Grinding wheel

40. Center for workhead spindle B & S No. 7(or MT No. 2)

41. 4" spindle extension

42. 4" extension wheel sleeve and coller

43. Belt for spindle drive (Poly-flex belt)

44. Draw-in bolt for workhead and washer

45. Tool cabinet

46. Extension and washers of slit-saw and side-mill Cutters.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Optional Accessories

NO:01 FACE MILL GRINDING ATTACHMENT

This attachment comprises a base, swivelling horizontally with respect to table, and a workhead swivelling at a 15 degree angle. This construction simplifies greatly the setting of elevation and depression angle. Further more, rugged design gives the M-40 the capacity for grinding large size cutters and tools.

Capacity: Max. Dia. Of cutter........18" (457mm)

NO:02 RADIUS GRINDING ATTACHMENT

This is ideal for sharpening the radii of ball end mills and styli. It consists of two slide bases, each with micrometer adjustment and a workhead having a M.T.No. 5 or B & S No. 12 taper hole spindle. Indexing of straight flutes cutters is possible by using an index plate mounted on the back of workhead.

Capacity:

Radius..............................................0-2" (0-50mm)

(In case that max. Dia of cutter is 4" (100mm)

Taper hole: M.T.No.5 or B & S No. 12 (specify order)

Convenient for grinding of ball end mills & styli.

NO:03 RADIUS GRINDING ATTACHMENT

This is suitable for corner radius grinding of face mills and shell end mills. The position for grinding shart is set by the micrometer to eliminate grinding error. The grinding capacity of this attachment is 0 through 1" radii (0 through 25mm) and 0 to 12" cutter diameter (0 through 300mm).

Capacity:

Radius.......................................0-1" (0-25mm)

Max. Dia. Of cutter......................11 3/4" (300mm)

An accurate radius on the. Corner of teeth can be ground.

NO:04 HELICAL GRINDING ATTACHMENT

This attachment is suitable for grinding the relief and rake angle of spiral cutters or the straight teeth of hobs, end mills and center drills. The work spindle is possible to be turned twice at Max. For the lead of 0 through infinity.

Taper hole of work spindle is M.T.No.4.

Lead: 0-8 (stepless) Spindle turns twice at max.

Index: 24 (Standard)

Grinding length: max. 12 1/2" Grinding length: max. 12 1/2" (320mm)

Module (Hob): max.8

Helix (Hob): max.±8°

NO:05 CYLINDRICAL GRINDING ATTACHMENT

This attachment is most suitable for straight or taper cylindrical grinding and for face grinding of various tools.

Capacity:

Swing...........................................................10" (250mm)

Main spindle speed..................................310rpm. (50c/s)

370rpm. (60c/s)

Motor.........................................................1/4HP. (0.2kw)

NO:06 INTERNAL GRINDING ATTACHMENT

This is generally used with the Cylindrical Grinding Attachment. of course, it can be used for grinding internal tapers.

Capacity : Internal spindle..................................20,000rpm

Length of hole up to 1-9/16" or 3" (40mm or 75mm)

Range of bore to be ground:5/16"-3/4" (8-20mm) or 1/2"-2" (12-50mm)

NO:07 WORKHEAD INDEXING ATTACHMENT

Accurate indexing can be made quickly and easily by mounting the Indexing Attachment on the standard workhead. This eliminates the need for a tooth rest which is normally required for grinding cutters. If not specified, workhead indexing attachment is provided with a plate of twenty four equally spaced slots. Includes one 24 notched index plate Extra index plates.....specify number of notches desired.

NO:08 EXTENDED GRINDING WHEEL SPINDLE

This attachment offers extreme convenience when the extended spindle application is required. As this spindle is also cartridge type construction, it is readily interchangeable with standard spindle. Spindle extension is 3" (75mm) Extension Convenient when the extended spindle application is required. Spindle is also cartridge type and interchangeable with standard spindle.

NO:09 SURFACE GRINDING ATTACHMENT

This is so called "Universal Vise" and ideally suited to grinding bits as well as surface grinding. It consists of a swivel vise and independent support provided between the vise and base. The intermediate support permits the vise to swivel 360 degrees horizotally and vertically, so the work-piece can be set easily.

Capacity:          Width of vise...........    ...........4" (100mm)

                  Depth of vise..........................1" (25mm)

                  Opening............................2 3/4" (70mm)

NO:10 DRILL POINTING ATTACHMENT

This attachment have been designed to provide a simple, effective means of sharpening drills accurately with the minimum of skill. The drill itself is held in a precision six jaw self-centring chuck, suitably geared to the operating handle.

NO:11 LATHE & PLANER TOOL GRINDING ATTACHMENT

This attachment facilitates setting cutters for grinding rake face and relief angles. The large work support provides an outstanding grinding capability This attachment is ideally suited to grinding cutters for lathes and planers.

Capacity:

3/8"-1 1/2" (10-38mm)

Convenient for grinding rake face and relief angles.

NO:12 SPRING COLLET CHUCK

This chuck can be mounted directly in the taper hole of the workhead a ASA No. 50. This is an indispensable attachment for small cutter grinding.

Spring Chuck for larger size cutters or adapter for 5C collets is also available.

Sizes of collets: 6,8,10,12,16,20,25(mm) or

1/4,5/16,1/2,5/8,3/4,1 (inches).

NO:13 WET GRINDING ATTACHMENT

This is so called” Coolant Supply System". It is conveniently used for cylindrical, internal, surface and various cutters grinding works when necessary.

Coolant pump motor.................1/8HP (0.1kw)

NO:14 DUST COLLECTOR

This accessory contributes toward operator safety and his health by collecting dust particles flying of the grinding wheel during grinding. It is compact and consumes a minimum of floor space.

 

** For more details please visit our web site at **

https://www.taiwanmachine.com.tw/ProductDesc.asp?Fkindno=F15&SKindno=S28&itemno=I038&PdGpID=235

Mold
Machine
Vehicle
Contact Supplier
Browsing History
Scroll Up
EZB2B.TW uses cookies,IP to collect data and continually improve the website. By continuing to use this website, you must agree to the use of cookies and IP.