11YRS
DENG-YEU MILLING MACHINE
886-4-23811347
886-4-23816095
No. 9-1, Wen Shan Nan Lane, Nan Gwen Rd., Nan Gwan Dist., Taichung, Taiwan
www.dengyeu.com

Products

Vertical and horizontal milling machine
Vertical and horizontal milling machine
DY-2500SVH

Product Information
•All casting is finished through annealing stress with M casting iron; the slides for X, Y, Z, axle are handled by heating and grinding; the sliding for X, Y, axle is light and clever without abrasion because of pasting anti-abrasion pieces. We use C5 level for X, Y, axle, pre-pressed nut of precise bead-rolling rod, which is to press smoothly and position well due to small gap. Using the timing oil-filling on X, Y, Z axle and nut to ensure the precision for each section.
•A fixed working table, a contact plane between the width of the saddle and the working table is so long that allows a high stability of processing.
•A wider table plane is able to emphasize a rigidity and tenacity.
•Using server auto-feeding on X.Y axle for over 2500 series and reducing working hours by rapid up and down motions. In order to reach a rapid up and down motion, Z axle is a function of reducing speed.
•Using a cannon head with strong structure of vertical milling head. The inside grinding gear is to fill oil by enforcement, 20-stage transmission. (it’s optional to select frequency non-stage transmission.) To shorten the working time and upgrade the enterprise competition because the core of the axle is able to have a boring automatically.

Specification

MODEL

2500SVH

TABLE

Working surface of table

1500x352mm

Longitudinal travel

1050mm

Cross travel

350mm

Vertical travel

390mm

T-slots (size x number x distance)

18mx3x70mm

Range of longitudinal feeds (mm/min)

0-1200mm/min

Rapid longitudinal traverse (mm/min)

2300mm/min

Rapid vertical traverse

500mm/min

HORIZONTAL SPINDLE

Range of spindle speeds (6set teps)

60Hz:  86-915 R.P.M

50Hz:  72-763 R.P.M

Taper of spindle nose

NST40

Distance of spindle center to table

100mm-490mm

Distance from spindle center to overarm

190mm

VERTICAL SPINDLE

Range of spindle speeds (20set teps)

60Hz: 
20set teps 75-3600 R.P.M.
Non-set tep 0-3600 R.P.M.

50Hz: 
20set teps 63-3000 R.P.M.
Non-set tep 0-3000 R.P.M.

Spindle travel

140mm

Taper of spindle nose

NST40

Swivelling angle of vertical milling head (R&L) each side

90°

Distance of spindle end to table top

Max 615 / Min 220

Swivelling overarm

 360°

Traverse of over arm

450mm

Feed of spindle (3 steps)

0.035 / 0.07 / 0.14 mm(PER REV.)

Distance of spindle center to column surface

110mm-700mm

MOTORS

Vertical spindle

5HP2/4P
(5HP Frequency Motor)

Horizontal spindle

7.5HP4P

Table longitudinal feed

DC (Server Motor)

Column up-down

1HP (Redicing Motor)

Coolant pump

1/8HP

Net weight

2200-2500Kg

Packing Measurement (Seaworthy wooden case)

1690x1790x1810mm

 There will be some changes for the specification and the design from time to time without any prior notice.

STANDARD ACCESSORIES:

    1. Coolant pump
    2. Adjust tools & tool box
    3. Work lamp
    4. Milling Knife Axle (horizontal accessory).
    5. Milling Knife Package (horizontal accessory)

OPTIONAL ACCESSORIES:

    1. Digital readout
    2. Vise
    3. Tool holder
    4. Clamping kits
    5. Ground parallels
    6. Pneumatic power(electronic power ) draw bar

 

Mold
Machine
Vehicle
Contact Supplier
Browsing History
Scroll Up
EZB2B.TW uses cookies,IP to collect data and continually improve the website. By continuing to use this website, you must agree to the use of cookies and IP.