886-4-25619442
886-4-25619325
No. 42, Lane 887, Homu Rd., Shern Kang Hsiang, Taichung, Taiwan
www.quickjet.com.twProducts
●New CSC type spindle: besides the original shaftl cooling, now provides two additional functions; ATS( air through spindle; STD) or CTS( coolant through spindle ; opt). The new equipped rotary joint (Hydraulic dynamic type) can fulfill coolant through application without speed limitation, operated under pressure 80bars, and almost maintenance free. ●Siemens controller 840Dsl, NCU730.3 ●1FN3 linear motors on 3-axes: contact and friction free drive system provides high dynamic stiffness and quick response. Siemens “ Thermo-Sandwich” cooling system guarantee low heat dissipation influence to frames. ●1FN3 combines with High precision linear guide ways (with low vibration, low friction and high rigidity) can achieve sub-micron machining accuracy. ●Machine frames by high damping composite material ●Oil cooler system for spindle, 1FN3 and spindle clamping system is under precise temperature control(±0.2°C ) and oil fine filtered 5µm. ●Z axis with precise counter balance system: provides good dynamics control, energy saving and also avoid work piece damaged when electrical power interrupted. ●Fulfill oil coolant and oil-mist machining conditions. ●Compact machine size.
Product Information
| TRAVEL | X axis (spindle left / right) |
500mm (Automatic tool changer 650mm) |
| Y axis (table in / out) | 300 mm | |
| Z axis (spindle vertical) | 250 mm | |
| Spindle nose to table surface（min/max） | HSK-E40 / 150-400 mm | |
| TABLE | Table area ( L x W ) | 350 x 650 mm |
| T-slot （W x No. x P） | 16 x 3 x 130 mm | |
| Height from floor | 768 mm | |
| Max. table load (evenly distributed) | 150 Kg | |
| SPINDLE CSC TYPE | Taper | HSK-E40 |
| Spindle speed | 40,000 RPM | |
| Motor | 11 kW | |
| Oil chiller | ± 0.2℃ of machine body temperature | |
| Shaft cooling function | ||
| Spindle with ATS function, CTS function (Optional) | ||
| FEED RATE | Cutting feed | 1-24,000 mm/min |
| X/Y/Z axis rapid traverse | X:30,000 mm/min，Y/Z:24,000 mm/min (0%,30%,50%,100%) | |
| PRECISION | Positioning accuracy | 0.0015 mm |
| Repeatability | 0.0015 mm | |
| AUTOMATIC TOOL CHANGER | Tool taper | HSE-E40 |
| Max. tool dia. | Ø10 | |
| Max. tool length | 150mm | |
| Max. tool weight | 3 Kg | |
| Tool storage capacity | 20 Tools / 30 Tools (Optional) | |
| AIR SUPPLY | Pressure / Consumption | 6 kg/cm2 / 500 l /min |
| POWER SUPPLY | Capacity | 40 KVA |
| COOLANT | Coolant pump | 0.58 kW x2 |
| Coolant tank capacity | 200 L | |
| MACHINE SIZE | Machine dimension （LXWXH） |
2,210 x 2,282 x 2,693 mm 2,957 x 2,282 x 2,693 mm (30支) |
| Machine weight | 5,810 kg | |
