14YRS
CHING HSYANG MACHINERY INDUSTRY CO., LTD.
慶祥機械工業股份有限公司
886-49-2510999
886-49-2510123
No.88, Sec. 2, Fencao Rd., Fenyuan Township, Changhua County 502, Taiwan
www.chinghsyang.com.tw

Products

CIRCULAR SAWING MACHINE/SEMI AUTOMATIC TYPE MANUAL/ PNEUMATI
Specialist in a Wide Array of Circular Sawing Machines & Cutting Machines
C-370, 1A, 2A, 3A

The Sawing Machines & Cutting Machines Available Range:It is an appropriate machine model for thick,middle,and thin hollow tubes,and solid tubes.
This model is driven by three-set gears,with great torque force,suitable for heavy-duty cutting,The largest pipe diameter can 120mm,and the square pipe can achieve 100x100.It is available for the furniture industry,sports equipment,sheet metal factories,and machine factories.

Specifications:
  • Two-way tongs, without bur when sawing, without powder and dust, with high accuracy.
  • Available sawing angles:
    • Left: 90° to 0°
    • Right: 90° to 45°
  • The front setting water box design of the cooling system is convenient and easy to clean up.
  • Iron chippings are treated together, convenient and clean.
Features:
  • C-370
    • Features of Hand-operated Tongs and Saw Feeding
      • Quick measurement of the size, hand-operated tongs, hand-operated saw feeding and withdrawing; you can control the saw feeding at any time and give the appropriate pressure in accordance with the size of a tube when doing the action of saw feeding; the saw blade can be used for a long time.
  • C-370-1A
    • Features of Automatic Tongs Hand-operated Saw Feeding
      • Besides the features of C-370, the automatic clamping function is another feature. When finishing measuring a tube's length, you can press down the switch, and the tube will be clamped tight immediately, which is able to avoid the danger of saw feeding without being clamped tightly.
  • C-370-2A
    • Features of Automatic Tongs Automatic Saw Feeding and Withdrawing
      • The model is most appropriate for huge amount. When finishing adjusting the saw blade and a tube's length, you can press down the pedal switch, and it will execute the functions of clamping and saw feeding, which will save the production time.
  • C-370-3A
    • Features of Automatic Tongs, Automatic Saw Feeding and Withdrawing, Feed, and Positioning
      • Using the PLC controller, control buttons are located together, allowing for simple operation, agile, easy to maintain.
      • Uniquely designed, most suited for floating feed system, accurate and rapid feeding does not damage workpiece surfaces.
      • Equipped with digital display for easy cutting length adjustment, quick and accurate.
      • The tongs' pressure is adjustable at will, ensuring that the tubes will not deform and be damaged.
      • Equipped with electronic-type saw blade protection device, the machine will stop automatically after the saw blade is blunt.
      • Equipped with the counting device that can set the amount and the function of machine stopping.
      • The automatic non-material machine stopping device.
      • Iron chippings are treated together, convenient and clean.

Specification

Model C-370 C-370-1A C-370-2A C-370-3A
Head Rotating Angle 90° / 45° 90° / 45° 90° / 45° 90°
Sawing Capacity Area: mm-Solid Bar 75/70 75/70 75/70 75
Sawing Capacity Area: mm-Round Tube 120/110 120/110 120/110 120
Sawing Capacity Area: mm-Angle Steel 115x115/100x100 115x115/100x100 115x115/100x100 115x115
Sawing Capacity Area: mm-Square Tube 115x115/100x100 115x115/100x100 115x115/100x100 115x115
Sawing Capacity Area: mm-Trough-shaped Steel 115x115/100x100 115x115/100x100 115x115/100x100 115x115
Sawing Capacity Area: mm-Rectangular Steel 125x100 / 125x100 125x100 / 125x100 125x100 / 125x100 125x100
Cutting Motor A:3HP/2HP - 2 / 4P
B:2HP / 1.4HP - 4/8P
A:3HP/2HP - 2 / 4P
B:2HP / 1.4HP - 4/8P
A:3HP/2HP - 2 / 4P
B:2HP / 1.4HP - 4/8P
A:3HP/2HP - 2 / 4P
B:2HP / 1.4HP - 4/8P
Cutting Speed A: 58/29 rpm
B:29/15 rpm
A: 58/29 rpm
B:29/15 rpm
A: 58/29 rpm
B:29/15 rpm
A: 58/29 rpm
B:29/15 rpm
Cooling Pump Power 1/8HP 1/8HP 1/8HP 1/8HP
Required Air Pressure 4 - 6 kgs/cm² 4 - 6 kgs/cm² 4 - 6 kgs/cm² 4 - 6 kgs/cm²
Used Circular Saw Blade HSS BLADE 275/370mm HSS BLADE 275/370mm HSS BLADE 275/370mm HSS BLADE 275/370mm
Feeding Length 3-700mm (standard) but can be prolonged 2,100mm and also can be feed 3 times (just for 3A models) 3-700mm (standard) but can be prolonged 2,100mm and also can be feed 3 times (just for 3A models) 3-700mm (standard) but can be prolonged 2,100mm and also can be feed 3 times (just for 3A models) 3-700mm (standard) but can be prolonged 2,100mm and also can be feed 3 times (just for 3A models)
Dimensions(mm) L1000 x W650 x H1420 L1000 x W650 x H1420 L1000 x W850 x H1350 L1000 x W2150 x H1700
Weight 260 kgs 270 kgs 350 kgs 720 kgs
Standard Accessories HSS BLADE Dia.300mm
Standard Accessories: A high-speed steel saw blade, a ruler (not applicable for 3A), a bottle of cutting oil, a set of tools, and a set of clamping apparatus.
HSS BLADE Dia.300mm
Standard Accessories: A high-speed steel saw blade, a ruler (not applicable for 3A), a bottle of cutting oil, a set of tools, and a set of clamping apparatus.
HSS BLADE Dia.300mm
Standard Accessories: A high-speed steel saw blade, a ruler (not applicable for 3A), a bottle of cutting oil, a set of tools, and a set of clamping apparatus.
HSS BLADE Dia.300mm
Standard Accessories: A high-speed steel saw blade, a ruler (not applicable for 3A), a bottle of cutting oil, a set of tools, and a set of clamping apparatus.

Mold
Machine
Vehicle
Contact Supplier
Browsing History
Scroll Up