No.93, Aly. 146, Ln. 388, Sec.2, Xinan Rd., Wuri Dist., Taichung City 414, Taiwan


Deep Hole Drilling Machine
Bed Type Deep Hole Drilling Machine
CNC ST-1500

This type of machine is designed with 3-axis for drilling molds in big size or accomplish irregular components.  The machine is made by cast iron, which is ideal for waterlines production, heat and ejector pin holes or hydraulic manifold.   With years of experiences, we have servo motor and ball screw for feeding to insure the feed rate smoothly.   Besides, the automatic lubrication pump is also served as standard accessory to make sure all the bearing surface are well lubricated.  If you are interested in more information about the machine, just feel free and contact us today!



  • Number of drill spindle: 1 No
  • Range of drilling dia.: 3 ~ 25mm(Option: 5mm ~40mm)
  • Max. depth of drilling: 1,500mm

  • Drill feed range: 10 ~ 500 mm/min
  • Spindle speed range: 0 ~ 6,000 rpm

Hydraulic system

  • Coolant pump pressure range: 10 ~ 100 kg/cm2;
  • Pump output: 30 ~ 60 L/min
  • Coolant tank capacity: 1,200 L

Working table stroke
  • Worktable dimensions: 1,300 x 1,800mm
  • Table cross travel(X-Axis): 1,600mm
  • Spindle head vertical travel (Y-Axis): 1,000mm
  • Effective drill stroke (Z-Axis): 1,500mm

Drive motor
  • Spindle motor: 5.5 KW(11KW)
  • Z-Axis: 1.2 KW(1.8KW)
  • Y-Axis: 2.5 KW
  • X-Axis: 2.5 KW
  • Chip screw: 0.1 KW
  • Coolant pump: 3.5 KW*1, 5.5kw*1
  • Automatic lubrication: 0.1 KW
  • Total machine power: 25 KW
  • Max. weight on table: 10,000kgs
  • Net weight: 16,000kgs
  • Machine dimensions (Approx): 5,400 x 5,800 x 3,500mm

Standard accessories

  • Paper filter
  • Magnetic separator
  • Chip and oil separator system
  • High pressure oil pump
  • Auto lubrication system
  • Protecting drill torsion system
  • Outer oil tank/Oil level gauge
  • Tranformer
  • Leveling screws & block
  • Tool box / work light / alarm light
  • Mechanical / Electrical operation manual
Special accessories
  • Oil cooler
  • Coolant oil
  • Gundrill
  • Guide bush
  • Rubber bush
  • Automatic Voltage stabilizer
  • Fully enclosed guard
  • Gundrill grinder
  • Safety door interlock
  • Oil mist collector
  • Filtration housing
  • Centrifuge
  • CNC ST-1500 with CNC and 3-axis is designed for drilling big size molds and irregular components.
  • The construction of CNC ST-1500 is all made by Cast iron.
  • This type machines are suitable for the production of waterlines, heat and ejector pin holes of injection molds, hydraulic manifold and heat-exchangers which require multi hole drilling.
  • Servo motor and Ball screw are used for the feed mechanism to insure smooth and convenience for feed rate adjust.
  • Hardened and ground main slide ways to hardness HRC 60. The opposite ways and gibes are all Turcite-B plated with hand scraped bearing surface.
  • Automatic lubrication pump is provided as standard accessory to ensure all bearing surface and screws are well lubricated.
  • CE requirement is available

  • Applications:
  • Coolant hole for moulds
  • Injection hole for plastic moulds
  • Automobile parts: Engine blocks
  • Aerospace parts
  • Heat exchanger
  • Irregular components
  • CE
Order Information:
  • Minimum Order: 1
  • Branded Product
  • FOB: Taiwan Port

Contact Supplier
Browsing History
Scroll Up