Socket inner size: Ø22.1 mm ± 0.15
Current: 12V/7A 
Product has CE approved.
Manufacturing location: Taiwan

Illuminated cigarette lighter, ceramic base suitable for European cars with wire and push button plug. Embedded design easy to assemble. Both positive and negative terminal are 250 type.

Installation instructions:
1. Remove heated plug and blub holder from the assembly. Press the two lugs of the green illuminated bezel assembly and push metal socket. This will separate embedded ring from metal socket.
2. Tilt the illuminated embedded ring form the front of the hole to install the embedded ring with the light up.
3. Slide the metal socket back inside bezel assembly, the metal socket has a teeth position; put it into the opposite cavity on the bezel assembly and confirm that the socket install firmly.
Always disconnect battery before working on car electrical circuits

　Contact Supplier

Add to Favorites