7YRS
PROMPT MACHINE TOOL CO.,LTD.
886-4-24937866
886-4-24933055
NO.225, CAOTI Rd., DALI DIST., TAICHUNG CITY 41263, TAIWAN
www.promptcnc.com

Products

Conventional Lathe
PML L Series- Conventional Lathe
PML560L

Features:
Selective bed width: L series: 400mm
Varied spindle bore diameters: L series: Ø85mm / Ø120mm (Option)
Thermal treated and precision ground alloy gears
Durable reservior oil bath type cross slide (for S series)
Universal gearbox for both imperial and metric thread-conversion table also attached
Tracks of cross slide and bed are well lubricated with lubrication pump (manual)
Overload device to ensure safety when operating
Thermal treated Meehanite bed casting
Wear-resistant phosphor bronze lead screw nuts
One piece base for high rigidity and low vibration
High-capacity coolant tank offers sufficient coolant output
All series certified for CE

Specification

* Besides PML560L, there are various other models;
  Click the pictures above or here to our official website to see more.

 

 

 

Model PML 560L Series PML 660L Series
Specifications 2240.2260.2280.22100.22120.22160 2640.2660.2680.26100.26120.26160
Swing Over Bed 560 mm (22") 660 mm (26")
Swing Over Cross Slide 340 mm  (13-1/3") 440 mm (17-1/3")
Center Hight 280 mm (11") 330 mm (13")
Center Distance (mm) 1000.1500.2000.2500.3300.4300 (40".60".80".100".132".172")
Swing Over Gap 788 mm (31") 890 mm  (35")
Bed Width 400 mm (15-3/4")
Spindle Nose ASA D1-8 / D1-11 (Opt.)
Spindle Bore 85 mm (3-1/3") / 120 mm (4-1/2") (Opt.)
Taper of Spindle Bore MT 7
Spindle speed  15~1500 rpm (12 steps)-spindle bore:85mm /
10~1000 rpm (12 steps)-spindle bore:120mm
Inch Threads Range 2~56 TPI
Metric Threads Range P0.5-14
Longitudinal Feeds Range 0.05~0.82 mm (0.002~0.032")
Cross Feeds Range 0.02~0.4 mm (0.001~0.0094")
Leadscrew Diameter 38 mm (1-1/2")
Leadscrew Pitch 4 TPI or 6 mm
Taper of Tail Center MT 5
Tail Spindle  Travel 165 mm (6-1/2")
Tail Spindle Diameter 85 mm (3-1/3")
Main Drive Motor 10HP (7.5KW) /
15HP / 6P (11KW. Opt.)
Coolant Pump 1/8HP (0.1KW)
Compound Rest Travel 200 mm (8")
Cross Slide Travel 375 mm (14-3/4")
Machine Dimension (cm)   L: 238.290.347.398.473.555
  W: 103
  H: 126
  L: 238.290.347.398.473.555
  W: 103
  H: 131
Packing Dimension (cm)   L: 270.315.361.410.485.588
  W: 115
  H: 196
  L: 270.315.361.410.485.588
  W: 115
  H: 196
Net Weight  (kgs) 2200.2550.2900.3150.3650.4860 2280.2630.2980.3230.3730.4940
Gross Weight  (kgs) 2300.2650.3050.3300.3800.5060 2380.2730.3130.3380.3880.5140

* The above specifications subject to change without prior notice.

Standard Accessories Optional Accessories
Tool Box 1pc Rapid traverse 
Centers 2pcs Chuck guard
Safety pin 1pc Change gear for D.P and module thread
Screw wrench for cutter setting 1pc   5C lever collet closer
Back plate 1pc Driving plate
Coolant system 1set Quick change tool post
4-way tool post 1set Digital readout 
Auto-feed stopper ring  1set Hydraulic copying machine
Center sleeve 1pc ID/OD ginder
Levelling pads 1set  

Mold
Machine
Vehicle
Contact Supplier
Browsing History
Scroll Up
EZB2B.TW uses cookies,IP to collect data and continually improve the website. By continuing to use this website, you must agree to the use of cookies and IP.