PINNACLE MACHINE TOOL CO., LTD.
嵩富機具廠有限公司
886-4-25252995
886-4-25252991
NO.149, Sec. 1, Guofeng Rd., Shengang Dist., Taichung City 429, Taiwan
www.pinnacle-mc.com

Products

5 - Axis Machining Center
BX900/BX900T High-Tech Expertise in 5-axis Machining
BX900/BX900T

BX series machines by Pinnacle offer the latest and most precise 5-axis technology in the market. Simplify setup and production of complex and multi-sided parts without sacrificing precision and accuracy and saving time. Optimized 5-axis concepts meet every requirement and prevail in all industries worldwide BX series designed by Pinnacle that are High rigidity structure to provide widest working range. Hi quality Meehanite casting iron, tempered for stress relief and over HB190 hardness to ensure deformation-free performance year and year.

Features

  • Real powerful 5-axis machining center

  • Fast and contour-accurate motion guide

  • High-quality surface

  • The shortest machining time

BX900/BX900T

High precision, 5-axis control vertical machining center that a swivel head with DD Motor on the rotary table to achieves the highest productivity in 5 axis machining.


HIGH SPEED 5 AXES M/C

5 axes Machining Center
Built-in 15000rpm Spindle Speed
Built-in C-axis table

Heidenhain TNC640

B-AXIS-SWIVEL MILLING HEAD

Hi-Speed, Hi-Power, Hi-Torque, Built-in Spindle 15000 rpm, swivels ±120°

UNIQUE B-AXIS DESIGN

The transmission mechanism of B axis for model BX700DD is innovated from dual worm wheel/shaft to direct drive. In addition to the smooth and powerful torque, the direct driving system features higher rotation sped, high servo response, zero backlash, and outstanding dynamic accuracy for the optimum workpiece surface finish. The external cooling system efficiently minimizes the structural thermo deformation and accuracy deflection, moreover, the output torque is upheld since the temperature is constantly kept in low and stable level.

The rear end of B axis shaft is fitted with and angular position coder (RCN729) to boost positioning accuracy of B axis. The application of direct drive motor in B and C axis increases the overall accuracy as well as machining efficiency of the machine.

Pinnacle BX is the best cost-effective manufacturing investment of 5-axis simultaneously controlled machining centers, it brings positive and instant results by improving machining accuracy and reducing cutting time.

BX700 / BX500 is high speed, high accuracy with HEIDENHAIN iTNC530 5-axis simultaneously controlled machining center. Equips 15000rpm built-in spindle, B-axis swivel head ±120°, and C-axis Ø630mm rotary table (Built-in DD C-axis) to optimize machining space and allows complex workpieces to be finished in just one setup and reduces cycle time.

SPINDLE TORQUE OUTPUT DIAGRAM

HOLLOW BALL SCREW WITH COOLING SYSTEM

Oil cooling through ball screws on X, Y, Z axis minimizes thermal deformation and backlash, while ensuring smooth motion during rapid traverse.

CNC CONTROLLER SYSTEM

BX series is high speed, high accuracy with HEIDENHAIN iTNC530 5-axis simultaneously controlled machining center. Standard with 15000rpm built-in spindle.

PLANE FUNCTION

The PLANE feature makes it easy to define a tilted working plane so that making everything much.

TILTING THE WORKING PLANE

Use tilting the working plane. With Cycle 19 with swivel heads or tilting tables. You program the operation as usual in the working plane, for example in X/Y. The machine runs the program in a plane that has been tilted by one or more rotary axes with respect to the main plane.

DCM (DYNAMIC COLLISION MONITORING)

DCM enables you to check for collision in the test run mode before acutally machining a part. To avoiding machine dowtimes. Simulation for a safety process.

TCPM FUNCTION (TOOL CENTER POINT MANAGEMENT)

In five-axis operations, TCPM function to move the tool reliably on the contour and ensure that the work surface is not damaged. Maintain the position of the tool tip when positioning with tilted axes.

With the aid of the TCPM function, the iTNC 530 automatically corrects the tool path for the machine geometry and the tool length as well as compensates the tool radiusin three dimensions.

CHIP FLUSHING SYSTEM

Chip flushing system is equipped to remove cutting chips inside of enclosure, which prevents chip accumulation and any possible damage to the linear guideways and ball screws.

COOLANT THROUGH SPINDLE (OPTION)

20 Bar high pressure pump and sub tank assure CTS system offers the highest efficiency of chip disposal.

CHIP CONVEYOR (OPTION)

Hinge type or scraper type chip conveyor in front side of machine (able head to left or right) removes chips from machine.

KINEMATICE OPT. (OPTION)

KinematiceOpt. is an important component to help you meet these high requirements: With a HEIDENHAIN touch probe inserted, a 3-D touch probe cycle measures your machine's rotary axes fully automatically. The results of measurement are the same, regardless of whether the axis is a rotary table, a tilting table or a swivel head.

B-AXIS-SWIVEL MILLING HEAD

BALL BAR DIAGNOSTICS

ALL ASPECT QUALITY SYSTEM

Quality comes not from inspection but from every Pinnacle staffs' mentality. The state-of-the-art inspection equipments only help us to prove our attitude and accuracy results.


Specification

MODELBX900BX900T
TABLE  
Table Size (mm)1700 x 8501700 x 850
Travel Ranges X/Y mm1500 / 9001500 / 900
Travel Ranges Z mmVertical 1000 / Horizontal 1100Vertical 1000 / Horizontal 1100
Max. Table Load (kg)12001200
Spindle Nose to Table Surface (Vertical) (mm)115~1115115~1115
Spindle Center to Table Surface (Horizontal) (mm)255~1355255~1355
T-slot (W x D x N mm)18 x 150 x 518 x 150 x 5
BUILT-IN SPINDLE  
Spindle TaperDIN40 (HSKA63)HSK63T
Bearing Inner Diameter (mm)Ø 70Ø70
Spindle Center to Column (mm)950970
Spindle Speed (rpm)1500015000
Main Motor (con/S6 60% kW)15 / 19.419 / 23
Motor TypeE+A mW16 / 17-8ATE AC180 / 150 / 8
Motor Torque (con/max Nm)71.6 / 17293 / 239
SWING HEAD  
Driver TypeWORM GEARDirect drive
Reduction Ratio1:120-
Tilting Range (deg)± 120°± 120°
Max. Speed (rpm)16.650
Min. Unit(deg)0.0010.001
Clamp Torque (Nm)1765 / 7652950 / 689
ROTARY TABLE  
Driver TypeDirect driveDirect drive
Table Diameter (mm)Ø800Ø800
Rotation Speed (rpm)50800
Min. Index (deg)0.0010.001
Max. Table Load(kg)1200-
AXIS SERVOMOTORS  
Rapid Feed Rate (XY/Z m/min)20 / 20 / 1620 / 20 / 16
Cutting Feed Rate (X/Y/Z mm/min)1000010000
X/Y/Z-axis Rated Torque (Nm)30.6 / 30.6 / 30.630.6 / 30.6 / 30.6
B-axis Rated Torque (Nm)11689
C-axis Rated Torque力(Nm)533533
TOOL MAGAZINE  
ATC TypeDISK / CHAINDISK / CHAIN
Tool Selection (Bi-Direction)RANDOMRANDOM
Tool Storage Capacity (PCs)30(40 / 60)30(40 / 60)
Max. Tool Diameter (mm)Ø75Ø75
Max. Tool Length (mm)250250
Max. Tool Weight (Kgs)88
MISCELLANEOUS  
Positioning X/Y/Z(mm)0.0050.005
B/C (sec)14" / 10"10" / 10"
Repeatability X/Y/Z(mm)0.0030.003
 B/C (sec)8" / 6"6" / 6"

 All Specifications And Designs Are Subject To Change Without Notice.

WORK RANGE

SPINDLE POWER CHART


Mold
Machine
Vehicle
Contact Supplier
Browsing History
Scroll Up