PINNACLE MACHINE TOOL CO., LTD.
886-4-25252995
886-4-25252991
NO.149, Sec. 1, Guofeng Rd., Shengang Dist., Taichung City 429, Taiwan
www.pinnacle-mc.com

Products

Double Column Machining Center
DV14/DV17/DV19/DV21 DOUBLE COLUMN MACHINING CENTER
DV14/DV17/DV19/DV21

DOUBLE COLUMN MACHINING CENTER

DV14 series Double Column Machining center that fully combines heavy cutting and high speed machining capabilities in one. The DV14 series is a profitable performer especially excellent for precision machining for extra heavy parts. To ensure maximum stability when handling heavy parts machining, the five major structural parts of the machine are manufactured from high quality Meehanite cast iron and ductile iron. The specially designed machine structure enables the machine to keep at the best accuracy condition after years of operation. With the roller type linear guide ways on X, Y, Z axis, the machine fully exhibits it heavy loading resistance and outstanding features.

To meet the high speed, high precision machining requirement, the DV14 series employs a direct-drive high speed spindle. This combines with a high / low speed gearbox for transmission with the wide speed range. It makes the machine ideal for high speed machining. In addition, the gearbox also provides high torque output, permitting the machine to perform heavy cutting with ease. The spindle head on the DV14 series is designed with advanced automatic compensation balancing system combined with the use of accumulator to control hydraulic cylinder, allowing the spindle to move smoothly and steadily at all times.


ROLLER TYPE LINEAR WAYS ON THREE AXES
  • All major structural parts are manufactured from high quality cast iron with tempering tread to relieve stress, ensuring maximum material stability without deformation.

  • Box type structural parts are rib reinforced to increase structural strength and rigidity.

  • Extra heavy base complete support of table and resists heavy load without deformation.

  •   X, Y, Z axis are mounted with roller type linear ways combined with extra wide between ways for added stability.

RIGID SPINDLE HEAD
  • The spindle head is a box-type construction that increases stability when performing heavy loading.

  • The linear ways on Z axis are specially designed with side layout to upgrade rigidity of the spindle head.

GEAR BOX
  • This spindle running is transmitted through a gear box, making the machine excellent for heavy cutting applications.

  • Wide spindle speed range from 10 to 6,000 rpm permit the machine to perform heavy cutting and fine finishing.

  • All gears and bearings in the gear box are oil-bath lubricated.

32 TOOLS CHAIN TYPE MAGAZINE (STANDARD)
  • The magazine is driven by a precision cam, featuring fast and accurate tool positioning.

  • Tool selection is bi-directional and random for fast tool change.

  • The magazine accepts ISO 50 tool shank.

  • The magazine is separately mounted from the cutting area combined with a protection door to prevent tools contamination from chips or coolant.

GEAR BOX

SPINDLE

CHOICE OF VARIOUS MILLING HEADS

THESE MILLING HEADS ARE OPTIONAL

PNEUMATIC BALANCE ON Z-AXIS

The Z-axis movement is counter-balanced through a pneumatic counter-balance system. An accumulator is equipped in the air circuit, ensuring fast and stable movement of Z-axis.

TWO SCREW TYPE CHIP CONVEYORS ON BASE

There are two screw type chip conveyors provided at right and left side of the base. During cutting, the chips are delivered through these chip augers to a chip conveyor for exhausting chips outside the machine.

NITROGEN CANISTER

CHAIN TYPE CHIP CONVEYOR (OPTIONAL)

LASER INSPECTION

RIGHT ANGLE TEST ON X AND Y AXES

BALL BAR INSPECTION

BALL BAR INSPECTION
WORK RANGE / TABLE SIZE

ABCDEFG
DV14171700120015015017001200900
DV14222200120015015022001200900
DV14323200120015015032001200900
DV14424200120015015042001200900

FLOOR SPACE

ABCDEFGHI
DV141722103816442019954100856725486005700
DV142222103816442019954100856725486005700
DV14322210381644201995610012009598106405700
DV144222103816442019958100155011948133005700


Specification

MODELDV1417DV1422DV1432DV1442
TRAVEL    
Travel Ranges (X x Y x Z mm)1700 x 1400 x 9002200 x 1400 x 9003200 x 1400 x 9004200 x 1400 x 900
Spindle Nose to table Surface (mm)160~1060160~1060110~1010110~1010
Spindle Center to Column (mm)404404404404
Distance between Column (mm)1400140014001400
TABLE    
Table Size (mm)1700 x 12002200 x 12003200 x 12004200 x 1200
T Slot  (W D x N mm  )22 x 150 x722 x 150 x722 x 150 x722 x 150 x7
Max. Table Load (kg/m2)5000500080008000
SPINDLE    
Tool Shank & Pull StudISO50ISO50ISO50ISO50
Spindle Inner Diameter (mm)Ø100Ø100Ø100Ø100
Spindle Speed (rpm) Gear8000800080008000
Draw Bar Force (Kgf)1800180018001800
Main Motor (con/30 min Kw)15/18.515/18.515/18.515/18.5
AXIS SERVO MOTOR    
Rapid Feed Rate (X/Y/Z m/min)20/20/2016/20/2016/20/2012/20/20
Feed Rate (X/Y/Z/ mm/min)10000100001000010000
Mitsubishi (X/Y/Z/ kW)HF703 7.0HF703 7.0HF703 7.0HF703 7.0
Fanucα 30/3000i 7.0α 30/3000i 7.0α 30/3000i 7.0α 30/3000i 7.0
Siemens1FK7 103 7.01FK7 103 7.01FK7 103 7.01FK7 103 7.0
FagorFXM75.20 7.0FXM75.20 7.0FXM75.20 7.0FXM75.20 7.0
HeidenhainQSY 190D 9.6QSY 190D 9.6QSY 190D 9.6QSY 190D 9.6
AUTO TOOL CHANGER    
ATC TypeDISK / ChainDISK / ChainDISK / ChainDISK / Chain
Cam TypeArmArmArmArm
Tool Selection (Bi-direction)RandomRandomRandomRandom
Tool Storage Capacity (PCs)24/3224/3224/3224/32
Max. Tool Diameter (mm)Ø115/ Ø127(Ø160/ Ø250)
Max. Tool Length350
Max. Tool Weight20
MISCELLANEOUS    
Air Requirement (Kg/cm2)6666
Hydraulic Requirement (Kg/cm2, L)60, 40L60, 40L60, 40L60, 40L
Voltage220220220220
Power Requirement (KVA)50505050
Coolant Tank Capacity (L)900900900900
Machine Weight (KGs)15500160001700018000
Machine Height (mm)4500
Floor Space (L x W mm)5800 x 41506090 x 41508130 x 415010310 x 4150
MODELDV1722DV1732DV1742
TRAVEL   
Travel Ranges (X x Y x Z mm)2200 x 1700 x 9003200 x 1700 x 9004200 x 1700 x 900
Spindle Nose to table Surface (mm)160~1060110~1010110~1010
Spindle Center to Column (mm)404404404
Distance between Column (mm)190019001900
TABLE   
Table Size (mm)2200 x 15003200 x 15004200 x 1500
T Slot  (W D x N mm  )22 x 150 x 922 x 150 x 922 x 150 x 9
Max. Table Load (kg/m2)80001000012000
SPINDLE   
Tool Shank & Pull StudISO50ISO50ISO50
Spindle Inner Diameter (mm)Ø100Ø100Ø100
Spindle Speed (rpm) Gear800080008000
Draw Bar Force (Kgf)180018001800
Main Motor (con/30 min Kw)15/18.515/18.515/18.5
AXIS SERVO MOTOR   
Rapid Feed Rate (X/Y/Z m/min)16/16/2016/16/2012/16/20
Feed Rate (X/Y/Z/ mm/min)100001000010000
Mitsubishi (X/Y/Z/ kW)HF703 7.0HF703 7.0HF703 7.0
Fanucα 30/3000i 7.0α 30/3000i 7.0α 30/3000i 7.0
Siemens1FK7 103 7.01FK7 103 7.01FK7 103 7.0
FagorFXM75.20 7.0FXM75.20 7.0FXM75.20 7.0
HeidenhainQSY 190D 9.6QSY 190D 9.6QSY 190D 9.6
AUTO TOOL CHANGER   
ATC TypeDISK/CHAINDISK/CHAINDISK/CHAIN
Cam TypeArmArmArm
Tool Selection (Bi-direction)RandomRandomRandom
Tool Storage Capacity (PCs)24/3224/3224/32
Max. Tool Diameter (mm)Ø115/Ø127 
(Ø160/Ø250)
Ø115/Ø127 
(Ø160/Ø250)
Ø115/Ø127 
(Ø160/Ø250)
Max. Tool Length350350350
Max. Tool Weight202020
MISCELLANEOUS   
Air Requirement (Kg/cm2)666
Hydraulic Requirement (Kg/cm2, L)60, 40L60, 40L60, 40L
Voltage220220220
Power Requirement (KVA)505050
Coolant Tank Capacity (L)900900900
Machine Weight (KGs)210002250024000
Machine Height (mm)450045004500
Floor Space (L x W mm)6090 x 53008130 x 530010310 x 5300
MODELDV1922DV1932DV1942
TRAVEL   
Travel Ranges (X x Y x Z mm)2200 x 1900 x 9003200 x 1900 x 9004200 x 1900 x 900
Spindle Nose to table Surface (mm)160~1060110~1010110~1010
Spindle Center to Column (mm)404404404
Distance between Column (mm)190019001900
TABLE   
Table Size (mm)2200 x 17003200 x 17004200 x 1700
T Slot  (W D x N mm  )22 x 150 x 1122 x 150 x 1122 x 150 x 11
Max. Table Load (kg/m2)80001000012000
SPINDLE   
Tool Shank & Pull StudISO50ISO50ISO50
Spindle Inner Diameter (mm)Ø100Ø100Ø100
Spindle Speed (rpm) Gear800080008000
Draw Bar Force (Kgf)200020002000
Main Motor (con/30 min Kw)15/18.515/18.515/18.5
AXIS SERVO MOTOR   
Rapid Feed Rate (X/Y/Z m/min)12/16/2012/16/2010/16/20
Feed Rate (X/Y/Z/ mm/min)100001000010000
Mitsubishi (X/Y/Z/ kW)HF703 7.0HF703 7.0HF703 7.0
Fanucα 30/3000i 7.0α 30/3000i 7.0α 30/3000i 7.0
Siemens1FK7 103 7.01FK7 103 7.01FK7 103 7.0
FagorFXM75.20 7.0FXM75.20 7.0FXM75.20 7.0
HeidenhainQSY 190D 9.6QSY 190D 9.6QSY 190D 9.6
AUTO TOOL CHANGER   
ATC TypeDISK/CHAINDISK/CHAINDISK/CHAIN
Cam TypeArmArmArm
Tool Selection (Bi-direction)RandomRandomRandom
Tool Storage Capacity (PCs)24/3224/3224/32
Max. Tool Diameter (mm)Ø115/Ø127 
(Ø160/Ø250)
Ø115/Ø127 
(Ø160/Ø250)
Ø115/Ø127 
(Ø160/Ø250)
Max. Tool Length350350350
Max. Tool Weight202020
MISCELLANEOUS   
Air Requirement (Kg/cm2)666
Hydraulic Requirement (Kg/cm2, L)60, 40L60, 40L60, 40L
Voltage220220220
Power Requirement (KVA)505050
Coolant Tank Capacity (L)900900900
Machine Weight (KGs)220002350025000
Machine Height (mm)450045004500
Floor Space (L x W mm)6090 x 53008130 x 530010310 x 5300
MODELDV2122DV2132DV2142
TRAVEL   
Travel Ranges (X x Y x Z mm)2200 x 2100 x 9003200 x 2100 x 9004200 x 2100 x 900
Spindle Nose to table Surface (mm)160~1060110~1010110~1010
Spindle Center to Column (mm)404404404
Distance between Column (mm)210021002100
TABLE   
Table Size (mm)2200 x 17003200 x 17004200 x 1700
T Slot  (W D x N mm)22 x 150 x 1122 x 150 x 1122 x 150 x 11
Max. Table Load (kg/m2)80001000012000
SPINDLE   
Tool Shank & Pull StudISO50ISO50ISO50
Spindle Inner Diameter (mm)Ø100Ø100Ø100
Spindle Speed (rpm) Gear800080008000
Draw Bar Force (Kgf)200020002000
Main Motor (con/30 min Kw)15/18.515/18.515/18.5
AXIS SERVO MOTOR   
Rapid Feed Rate (X/Y/Z m/min)12/16/2012/16/2010/16/20
Feed Rate (X/Y/Z/ mm/min)100001000010000
Mitsubishi (X/Y/Z/ kW)HF703 7.0HF703 7.0HF703 7.0
Fanucα 30/3000i 7.0α 30/3000i 7.0α 30/3000i 7.0
Siemens1FK7 103 7.01FK7 103 7.01FK7 103 7.0
FagorFXM75.20 7.0FXM75.20 7.0FXM75.20 7.0
HeidenhainQSY 190D 9.6QSY 190D 9.6QSY 190D 9.6
AUTO TOOL CHANGER   
ATC TypeDISK/CHAINDISK/CHAINDISK/CHAIN
Cam TypeArmArmArm
Tool Selection (Bi-direction)RandomRandomRandom
Tool Storage Capacity (PCs)24/3224/3224/32
Max. Tool Diameter (mm)Ø115/Ø127 
(Ø160/Ø250)
Ø115/Ø127 
(Ø160/Ø250)
Ø115/Ø127 
(Ø160/Ø250)
Max. Tool Length350350350
Max. Tool Weight202020
MISCELLANEOUS   
Air Requirement (Kg/cm2)666
Hydraulic Requirement (Kg/cm2, L)60, 40L60, 40L60, 40L
Voltage220220220
Power Requirement (KVA)505050
Coolant Tank Capacity (L)900900900
Machine Weight (KGs)235002400025500
Machine Height (mm)450045004500
Floor Space (L x W mm)6090 x 53008130 x 530010310 x 5300

 All Specifications And Designs Are Subject To Change Without Notice.


Mold
Machine
Vehicle
Contact Supplier
Browsing History
Scroll Up
EZB2B.TW uses cookies,IP to collect data and continually improve the website. By continuing to use this website, you must agree to the use of cookies and IP.