1YRS
永鉅精密科技股份有限公司
YONG JU PRECISION TECHNOLOGY CO., LTD.
YONG JU PRECISION TECHNOLOGY CO., LTD.
886-4-7530879
886-4-7530869
彰化縣二林鎮科技路20號(中部科學園區)
www.fourstarcnc.com產品介紹
規格數據
High-Speed Moving Table Machining Center Specification
| Item | Unit | FQ-1422 | FQ-1432 | |
|---|---|---|---|---|
| Distance between columns | mm | 1400 | ||
| Table size | Length | mm | 2000 | 3000 |
| Width | mm | 1200 | ||
| Maximum Table Load | ton | 8 | 10 | |
| T-slot | Width x Pitch x NO | mm | 22 x 150 x 7 | |
| Travel | X -axis | mm | 2200 | 3200 |
| Y -axis | mm | 1300 | ||
| Z -axis | mm | 800 | ||
| Spindle | Nose to table | mm | 100 ~ 900 | |
| Speed | rpm | BBT40 - 15000rpm | ||
| Power | kW | 20 kW | ||
| feedrate | Cutting | m/min | 15 | |
| X axis G00 | m/min | 25 | ||
| Y / Z axis G00 | m/min | 25 | ||
| ATC & tool magazine | Capacity / Max Dia | mm | ATC 24pcs / Max. dia Ø 90 ( full tools ) ; Ø 180 ( Adjacent pocket empty ) | |
| Max tool weight / Length | Kg/mm | 7Kg / 250mm | ||
| Tool selection | Arm-cam | |||
| Power / Pneumatic | 60 KVA / 6.5 kg/cm² | |||
| Machine size | Length | mm | 6680 | 8680 |
| Width | mm | 3410 | ||
| Height | mm | 4045 | ||
| Machine Weight (app.) | ton | 20 | 25 | |
All data will change based on the actual situation without notice.
Standard Accessories
|
|
|
Optional Accessories
|
|
|
Technical data of SIEMENS 828D
| System performance | |
|---|---|
| Basic quantity of axes / spindles / auxiliary axes | 4 |
| Each additional axis / spindle | |
| Each additional axis / spindle | |
| Max. configuration axes / spindles / auxiliary axes | 6 |
| Max. number of interpolating axes | 4 |
| Max. number of machining channels | 1 |
| Minimum block cycle time | 2 ms |
| CNC user memory (extendable by user-CF-card) | 3M byte |
| CNC Functions | |
| Tool management with monitoring of tool life andworkpiece count | |
| Replacement tools | |
| Max. number of tools / cutting edges | 128/256 |
| Number of settable zero-offsets | 100 |
| Asynchronous subroutines ASUB | |
| Synchronized actions and high-speed auxiliary function output | |
| Acceleration with jerk limitation | |
| Look Ahead (number of blocks) | 100 |
| Compressor for 3-axis machining | |
| Advanced Surface | |
| A, B, C spline interpolation | |
| TRANSMIT and peripheral surface transformation | |
| Travel to fixed stop | |
| Travel to fixed stop with Force Control | |
| Inclined axis for nonorthogonal Y-axis | NA |
| Synchronous spindle function for subspindle (CP Static) | NA |
| Synchronous spindle function multiedge turning (CP Basic) | NA |
| Pair of synchronized axes Gantry | |
| Temperature compensation | |
| Bidirectional leadscrew error compensation | |
| Multi-dimensional sag compensation | |
| Master / slave for drives | NA |
| Analysis of internal drive values | NA |
| CNC Programming and Operation | |
| Programming language(DIN 66025 and high-level language expansion) | |
| Online ISO dialect interpreter | |
| Technology cycles for drilling and milling | |
| Residual material detection and machining | |
| Programming support for technology cycles(programGUIDE) | |
| ShopTurn / ShopMill machining stepprogramming | |
| Measuring cycles for drilling / milling and turning | |
| Simulation in plane display | |
| Simulation in 3-D display | |
| Simultaneous recording(real-time simulation of current machining operation) | |
| Extended operator functions for complex turningand milling tasks | |
| Contour handwheel | |
| Network drive management | |
| Remote diagnostics function RCS Host | |
| PLC Functions | |
| Integrated PLC based on SIMATIC S7-200 | |
| PLC periphery modules PP 72 / 48D PN, PP 72 / 48D 2 / 2A PN | |
| Ladder viewer and add-on editor on board | |
| Processing time per PLC command | 0.025µs |
| Max. number of PLC ladder steps | 24000 |
| Servo-synchronous High Speed PLC Task | |
| Reaction time to process events (terminal to terminal) | ~7.5 ms |
| Max. number of digital inputs / outputs | 288/192 |
| Max. number of analogue inputs / outputs | 8/8 |
| PN / PN coupler | |
| Commissioning and Service Functions | |
| Easy Screen easy creation of user screens(OA Runtime License from 5 user screens) | |
| Service Planner planner for maintenance tasks | |
| Easy Extend management of machine components | |
| Easy Archive data archiving | |
Standard, Optional, NA not available
