886-4-22392345
886-4-22392357
No. 530, Sec. 1, Songzhu Rd., Beitun Dist., Taichung City 40643, Taiwan
www.twspindle.comProducts
Tapping Center Spindle with Housing diameter 100.
There are 2 types for Tapping Center Spindle with Housing diameter 100, Model NO. are T3-FPS and T3-FTS.
T3-FPS is Tapping Center Pulley Driven Spindle, tool holder is BT30.
T3-FTS is Tapping Center Direct-Drive Spindle, tool holder is BT30, BBT30 and ISO30.
Tapping Center Spindle with Housing diameter 100, T3-FTS and T3-FPS, have the features of low inertia, high acceleration and deceleration, and synchronous tool exchanging.
Tapping Center Spindle with Housing diameter 100, Model NO. is T3-FPS which clamping type is steel ball, tool holder is BT30, Max. speed is 15000 rpm.
Tapping Center Spindle with Housing diameter 100, Model NO. is T3-FTS which clamping type is grippers, tool holder is BT30, BBT30 and ISO30, Max. speed is 15000 rpm.
a. Front End Labyrinth Design with Air Seal
The tapping center spindle model has a front labyrinth with air seal, making it suitable for high speed tapping.
b. Tool Unclamping Ring with Long Life
The heat-treated tool unclamping ring prevents wear and tear failure from the high speed synchronous tool exchanging.
Specififcation Of Pulley Driven Tapping Spindle
| MODEL NO. | TOOL HOLDER | MAX. SPEED (RPM) |
NO. OF BEARINGS | CLAMPING TYPE | DIAMETER OF FRONT BEARING (MM) | OUTER DIAMETER OF HOUSING (MM) | TRAVEL FOR RECOMMENDED MACHINE TYPE |
|---|---|---|---|---|---|---|---|
| T3-FPS | BT30 | 10000 12000 |
4 | Steel ball | Ø 45 | Ø 100 | above 500 |
| T3-FTS | BBT30 BT30 ISO30 |
12000 15000 18000 |
4 | Grippers | Ø 45 | Ø 100 | above 500 |
Table Of Outer Dimensions Of Pulley Driven Tapping Spindle
| SERIES | MODEL NO. | L | L1 | L2 | L3 | L4 | P | W1 | W2 | W3 | D1 | D2 | D3 | M1 | REFERENCE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TP-100 | T3-FPS | 335 | 50 | 195 | 134 | 285 | 5GT40T | 120 | 55 | 50 | 100 | 100 | 138 | 4-M8 Ø 120 (non-isometric distance) |
Diagram 1 |
Table Of Outer Dimension Of Direct-Drive Tapping Spindle
| SERIES | MODEL NO. | L | L1 | L2 | L3 | L4 | W1 | W2 | D1 | D2 | D3 | D4 | D5 | D6 | M1 | REFERENCE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TD-100 | T3-FTS | 299 | 51 | 195 | 134 | 120 | 55 | 100 | 100 | 138 | 80 | 60 | 35 | 4-M8 Ø 120 (non-isometric distance) |
Diagram 2 |
