廣機工業有限公司
SELICA INTERNATIONAL CO., LTD.
886-4-24630182
886-4-24638910
台中市西屯區西林巷48-26號
www.selica.com.tw

產品介紹

HYBRID SPHERE CNC LATHE
SBL-100T
HYBRID SPHERE CNC LATHE SBL-100T

Application: ball pin, ball joint machining, femoral head, inner ball joint, out ball joint, tie rod.
SBL series is designed for the ball head machining, which is the best solution for high quality sphere roundness and surface roughness.
SBL series includes rough turning, fine turning, diamond burnishing, part pulling, and cut-off process.

Feature
Application: ball joint machining, femoral head, inner ball joint, out ball joint, tie rod.
SBL series is designed for the ball head machining, which is the best solution for high quality sphere roundness and surface roughness.
SBL series includes rough turning, fine turning, diamond burnishing, part pulling, and cut-off process.
Burnishing process is ideal to enhance the surface hardness, extend the life-time and enlarge the allowance of abrasion.
About diversity of control axis, SBL series use B axis to do ball head machining and burnishing. B axis process the circular movement, so that the roundness can be achieved up to ±0.01mm. On the other hand, for traditional CNC lathe, the sphere machining is controlled by X and Y axis only, which lead to oval shape.
Except standard advantage of CNC controller, SBL series uses sliding heading spindle design and square guide way on Z axis movement, which ensure the accuracy and stability.
SBL series can equip with gang type tool (4-position), hydraulic turret (6-position) and power turret (8-position) to achieve multiple application.

Spindle Feature
Spindle motor equip BiI8/10000 (7.5kw), which hold heavy loading and stability while doing the burnishing process.
High-rigidity spindle and high-speed bearing support spindle speed up to 6000 rpm with high stability.
While machining special angle or using special tool, break plate support accurate position of spindle.
Belt type driver ensures powerful loading, steady performance and low cost of maintenance.

Materials
Worm gear : Special high-tensile aluminum-brass equal in strength to a steel alloy.
Worm shaft : Hardened alloy steel
High Rotation Torque
The combination of brass and alloy steel offers less friction. Motor torque is transferred efficiently. High class materisl worm system guarantees high torque transmission.

Large Worm Gear
The worm gear with a large pitch diameter creates a large engagement area and less pressure on the contact surface, resulting in resistance against wear.

規格數據

Model Unit SBL-100T SBL-180T SBL-250T
Swing over bed mm Ø350 Ø500 Ø520
Max. turning diameter (ball head) mm Ø100 Ø180 Ø250
Max. turning diameter (ball valve) inch Ø1/2"~2-1/2" Ø2"~4.5" Ø3"~6"
Spindle nose type ASA A2-4 A2-5 A2-6
Spindle chuck type   5C Collet Chuck
16C Collet Chuck(Opt.)
5" 3-Jaw Chuck (Opt.)
16C Collet Chuck
6" 3 Jaw Chuck (Opt.)
16C Collet Chuck
8" 3 Jaw Chuck (Opt.)
Spindle bore mm Ø45 Ø56 Ø62
Spindle speed rpm 4000 (Std.)
6000 (Opt. )
3000 (Std.)
4500 (Opt. )
2000 (Std.)
4000 (Opt. )
Spindle power kw 5.5kw (Std.)
7.5kw (Opt. )
7.5kw (Std.)
10kw (Opt. )
11kw (Std.)
X-axis motor power kw 1.2 1.2 1.8
Z-axis motor power kw 1.8 2.5 2.5
B-axis motor power kw 3 3 3
X-axis travel mm 90 90 90
Z-axis travel mm 90 90 90
B-axis travel degree -60° / +95° -60° / +95° -60° / +95°
Z-axis rapid traverse rate mm/min 15000 15000 15000
X-axis rapid traverse rate mm/min 15000 15000 15000
B-axis rapid traverse rate mm/min 6000 6000 6000
Number of tool station T 6 (Hydraulic turret) 6 (Hydraulic turret) 6 (Hydraulic turret)
Tool size mm 20x20 20x20 20x20
Machine dimensions (LxWxH) m 2.5x1.9x1.8 2.8x2.2x1.9 3.1x2.3x1.9
Voltage   220V/60HZ/3P 220V/60HZ/3P 220V/60HZ/3P
Power requirement kva 20 25 28
Weight kg 3000 3300 3800

Standard Accessories

Optional Accessories

   
● Collet chuck ● Spindle motor upgrade
● Hydraulic cylinder ● Spindle speed upgrade
● Hydraulic turret 6 position ● X axis extend to 150 mm
● Power unit ● Z axis extend to 150 mm (for long part)
● Pneumatic system unit ● Upgrade to hydraulic servo turret (8T)
● Full guard ● Upgrade to servo power turret (8T) with C axis
● Machine base ● C axis air breaking system
● Heat exchanger ● 16C collet chuck and collet (work piece diameter less than Ø40 mm)
● Automatic lubrication system ● Extention nose collet type chuck and collet (ball valve) with orientation pin
● Three color warning light ● 3 jaw chuck
● Working lamp ● Chuck air blow
● Coolant system ● Burnish diamond tool holder and tool
● Tool and tool box ● Burnish diamond tool
● Wedge block ● Chip conveyor and cart
● Leveling bolts and blocks ● Transformer
● Operation manual ● Voltage Stabilizer
● Machine voltage: 
   220VAC / 60HZ / 3 phase
● CE mark
 

模具
工具機
車輛
聯絡我們
瀏覽紀錄
Scroll Up