886-4-26836919
886-4-26839900
No.66, Lane 100, Shueitou 1st Road, Waipu Dist., Taichung City 438, Taiwan
www.gentiger.com.twProducts
Feature
Optimal Machine Structure
The model GT-2516V is a double column structure design for high speed machining. The table is independently installed on the base and fully supported by 3 roller-type linear guideways through the entire stroke, assuring maximum accuracy and dependability. The columns are one-piece constructed for extra high rigidity.
Lifetime Accuracy
All casting are stress relieved and seasoning treated for long term accuracy and long service life.
Three Axes Linear guide Ways
Roller type linear guide ways on three axes feature higher feedrate, resist heavier loads and ensure superior dynamic accuracy and a long service life. X-axis is equipped with 3 linear guide ways for superior rigidity.
Three axes are driven by powerful servo motors. Its strong power can reduce machining time for large molds and increase profitability.
Three axes feedrates :
Rapid feedrates 20/18/20 m/min.
Cutting feedrates 20/18/20 m/min.
Three axes are equipped with Heidenhain optical scales.
Positioning accuracy: 0.005mm/Full Stroke. (ISO-230-2).
Repeatability : < 0.004mm/Full Stroke. (ISO-230-2).
Cutter balance should be calibrated to within G2.5.
Finishing Time:
Material: Aluminum
Tool: R5 ball nose cutter
Finishing Time:
Material: NAK80 (HRC40)
Tool: R4 ball nose cutter
Specification
| MODEL | T10 | T15 | S24A |
| Travel (X / Y / Z) | 2500 x 1600 x 700 / 800 mm (Opt.) | ||
| Table Area | 2800 x 1600 mm | ||
| Max. Spindle Speed (rpm) | 10000 | 15000 | 24000 |
| Type of Spindle Motor | Direct Drive | Direct Drive | Built-in |
| Spindle Taper | BT / BBT-50 | BT / BBT-40 | HSK-A63 |
| ATC Capacity | 20 tools / 40 tools (Opt.) | ||
* SIEMENS control is standard. HEIDENHAIN, FANUC and MITSUBISHI control are optional.
* Various door height or Y axis 3 linear guideways of SRG65 is available for option.
* Above specifications are subject to change without prior notice.
STANDARD ACCESSORIES
- Coolant tank
- Work lamp
- Tool box
- Coolant motor
- Coolant system
- Spindle air blow system
- Chip air blow device
- Air conditioner for electrical cabinet
- MPG
- M30 work end indication lamp
- Spindle cooling system
- Caterpillar chip conveyor and cart
- Operation and maintenance manual
- Leveling bolts and pads
- Helix chip conveyors along side working table
- Network function
- X,Y,Z axis optical scale
OPTIONAL ACCESSORIES
- Oil and lubricant separator
- Oil-mist cooling system
- Auto tool measurement system
- Auto workpiece measurement system
- Coolant through spindle device
