14YRS
PERFECT TECHNOLOGY CO., LTD.
886-4-26865253
886-4-26882279
No. 21, Kaiyuan Rd., Dajia Dist., Taichung City 437024, Taiwan
www.perfect-cnc.com

Products

BT spindle test bar BT pulling force
XXRG Digital Spindle Force Dynamometer
XRG 主軸拉力計數顯式

ynamometer

Characteristic
Model : XXRG

Spindle dynamometer (spindle tension meter) BT30, BT40, BT50
※ Features: Hydraulic mechanical structure, high stability
※ Specifications Instructions:
1. Check if the tension gauge on the tension meter matches the four-claw gauge
Corresponding grid.
2. Tension meter and taper parts of the front spindle wipe clean,
Clamp tension meter can be.
3. Rally gauge pressure design: 1 kg / cm² = 10kg = 100 N
4. Taiwan's "SKUN" production of digital display, LCD hydraulic gauge

Specification

Digital Spindle Force Dynamometer

Model

Measuring range

Package weight kg

BT30-45°

0~70bar                 tolerance                 ±0.5KG

4.2KG

BT30-60°

BT30-90°

JIS6339-30

ISO30

0~100bar                 tolerance                  ±1.0KG

ISO30-R3

DIN30

SK30

Model

Measuring range

Package weight kg

BT40-45°

0~250bar                 tolerance                  ±20.KG

4.3KG

BT40-60°

BT40-90°

CAT40*45°

CAT40*60°

CAT40*90°

ISO40-A

ISO40-B

MAZAK-40

JIS6339-40

DIN40

SK40

 

Model

Measuring range

Package weight kg

BT50-45°

0~400bar                 tolerance                 ±3.5KG

6.7KG

BT50-60°

BT50-90°

CAT50*45°

CAT50*60°

CAT50*90°

ISO50

MAZAK-50

JIS6339-50

DIN50

SK50

1 bar=1.02kg/cm2

Digital Rally Meter Operating Instructions:

a: Pull force count explicit return to zero setting method

   1. Turn the A rod to a loose turn so that it has no pressure.

   2. Turn on (ON/OFF button) and press and hold (Light/P-H button)

   3. Enter the mode setting, there will be a flashing number, press (REST 

    button) Set to “9”, press (Light/P-H) to enter standby time

   Press (REST) to set to “5”, then press (Light/P-H) twice.

   Will be automatically set to zero,

   4. Press (ON/OFF) again to select the unit.

   5. Tighten the A-pull rod again. At this time, the pressure value will 

   go up. Please stay at the most appropriate pre-pressure 

   value indicating that it should be between 5kg. 

PS. To change the settings again,you have to wait for the shutdown 

before you can make settings.

b: pull force counting explicit fueling method

    1. First remove the plug from the B

    2. Turn the "A" Pull studs to loose

    3. Push the A rod inward again (to make the oil chamber oil    

         level retract)

    4. Fill the R68 hydraulic oil from the B hole and lock the rear plug.

    5."A" Pull studs can be pressurized to about 5KG.

 

c:Method of pull stud replacement

    1. Use the adjustable wrench to clamp the seat of "D"

    2. Turn the "A" Pull studs ("D" to hold )

    3. Replace the new Pull studs "A" and lock it again.

    4."A" Pull studs can be pressurized to about 5KG.

Screw thread 1/4PT  1 bar=1.02kg/cm2

image.png

image.pngimage.png

1. boot display: After loading the battery, press and hold the power / unit key to display the current pressure value \

2. Pressure value to zero: When the pressure value is displayed, the zero button is pressed for three seconds, the pressure is zeroed.

3. Other proposed and set, see below.

Pressure gauge button function description:

A. Button Definition: There are three buttons on the pressure gauge panel

1. Power / Unit: The left button is - power / unit key

2. Backlight: The middle button is - Backlight

3. Zero button: The right button is - zero button

8. Parameter setting mode: At the same time, press and hold the backlight key, enter the parameter setting mode,

For details, see (3) Parameter setting mode.

C. Change the pressure unit: press the power / unit key click, that is, the current pressure unit change.

D. backlight switch: press the backlight key click, that is, turn on or off the backlight.

E. shows the maximum pressure value:

1. Press and hold the backlight key for three seconds, the LCD displays the maximum pressure value, and the "Max" pattern below the LCD flashes.

2. Press and hold the backlight key for 3 seconds, and return to normal working condition.

F. maximum pressure value zero:

In the state of displaying the maximum pressure value, press and hold the zero key for 3 seconds, the LCD will display "...." For 1 second, and the maximum pressure value will be zero.

G. Pressure value zero: Pressing the zero key for 3 seconds while the pressure value is displayed, the current pressure value is zero.

Parameter setting mode

A. The first item: zero mask setting

1. At the same time, press and hold the backlight key, enter the parameter setting mode.

2. Setting Mode The first item is to set the zero mask range, and the screen displays CUt.X.

3. Use the zero key to adjust the X number, X is 1-9.

B. second: shutdown time setting

1. Press the backlight key again, enter the setting mode The third is the shutdown time setting, the screen displays LCd.X.

2. Use the Zero key to adjust the number of X, X is 1-9.

C. Third: Turn off the backlight time setting

1. Press the backlight key again, enter the setting mode The third is to turn off the backlight time setting, the screen displays LEd.X.

2. Use the zero key to adjust the number of X, X is 1-9 D. The setting is completed - Save the setting:

1. Press the backlight key again, then the set value is memorized.

2. Then back to normal working status display

 

 

Mold
Machine
Vehicle
Contact Supplier
Browsing History
Scroll Up
EZB2B.TW uses cookies,IP to collect data and continually improve the website. By continuing to use this website, you must agree to the use of cookies and IP.