QUICK JET MACHINE CO., LTD.
886-4-25619442
886-4-25619325
No. 42, Lane 887, Homu Rd., Shern Kang Hsiang, Taichung, Taiwan
www.quickjet.com.twProducts
Vertical Milling&Boring Machining Center
Vertical Milling&Boring Machining Center AV-70S
AV-70S
●Complete spindle cooling solution ：High technology of 2 circuits function “ Conventional spindle Cooling + Additional shaft cooling “ to solve the problem of variation from spindle thermal growth. ●Using the most advance computer Aid Design Finite Structural analysis ,an extremely rigid machine base foundation was created that supports and maintains the outstanding accuracy of this high performance machine . ●High tech built-in motor spindle-FISCHER that offer a complete speed range from 200 to 36,000 rpm . Not only powerful torque for rough cutting with low speed but high accuracy for finish cutting with high speed .
Application Example:
1. Automative lamp / reflector
*NO any polished or photoshoped works!
2. 精緻包裝盒模具產業-化妝盒/手機/筆記本電腦背板
Specification
| TRAVEL | |
| X axis (spindle left/right) | 700mm |
| Y axis (table in/out) | 400mm |
| Z axis (spindle vertical) | 350mm |
| Spindle nose to table nose | 150-500 mm |
| Oil chiller for 3 axes ballscrew | ±0.1°C of ambient shop temperature |
| XYZ drive protection | Torque Limit Coupler Direct |
| TABLE | |
| Size | 850 x 450 mm |
| T-slot (W x No. x P) | 18 x 3 x 135 mm |
| Max. table load (evenly distribution) | 800 Kgs |
| SPINDLE (BUILD-IN) | |
| Speed | 36,000 r.p.m |
| Motor | 20 HP (15 Kw) |
| Taper | HSK-E50 |
| Oil chiller | ±0.1°C of ambient shop temperature |
| FEED RATE | |
| Cutting feed | 1-24,000 mm/min |
| X.Y.Z rapid traverse | 24,000 mm/min (0%, 30%, 50%, 100%) |
| PRECISION | |
| Position accuracy (X/Y/Z) | 0.004 mm |
| Repeatability (X/Y/Z) | 0.002 mm |
| AUTOMATIC TOOL CHANGER (Disk magazine) | |
| Max. tool dia. | Ø20 |
| Max. tool length | 200 mm |
| Max. tool weight | 3 kg |
| Tool storage capacity | 12 tools ( op. 20 tools ) |
| AIR SUPPLY | |
| Pressure / Consumption | 6 kg/ c㎡ / 500l/min |
| POWER SUPPLY | |
| Capacity | 47 KVA |
| COOLANT | |
| Coolant pump | 0.58 Kw x 1 , 0.2 Kw x 1 |
| Coolant tank capacity | 150 L |
| MACHINE SIZE | |
| Machine (L x W x H) | 2,531 x 1,925 x 2,663 mm |
| Machine weight | 5,7000kg |
- NOTE：All dimensions shown in this catalog ,other than metric dimensions are approximations and been rounded off.
- Specifications and design characteristic are subject to change without prior notice .
